Lean-to straight eave insulated greenhouses are offered at Glass Structures Limited. All holes are drilled and punched during fabrication and all parts are cut to proper sizes before the finish is applied. Once the finishing process is complete, most gaskets and tapes are run into place, resulting in minimal waste or shortages. The result to these extra steps is a product which is easy to install and requires substantially less time for field installation.
Ten standard colors in addition to the typical bronze and white are available, or any custom color in a high performance PPG forced hot air dried finish. Kynar and anodized finishes are also available upon request.
For some practical ideas, view our Lean-To Greenhouse Photos.